|
|
  |
|
 |
 |
XTREME HP is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea
liner system for metal, concrete, fiberglass and wood surfaces.
Features
|
Seamless |
High Build |
|
Tough and Elastomeric |
Quick Drying |
|
Chemical Resistance |
Low temperature Flexibility |
|
Abrasion and Impact Resistant |
Coat A1:1 and Coat B1:1 is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner
system for metal, concrete, fiberglass and wood surfaces.
Application
Both Side-A and Side-B materials should be preconditioned at 75-80°F before application. The simple spray
equipment can have a single motor driving two separate fixed ratio proportioning pumps. It is recommended to use
a 3/8" x 24 element mixing wand / Static spiral mixer for proper mixing.
Coat A HP / Coat B HP is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for
metal, concrete, fiberglass and wood surfaces.
Application
Both Side-A and Side-B materials should be sprayed at temperatures above 150°F. Adequate pressure and temperature
should be maintained at all times.
Xtreme LP is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal,
concrete, fiberglass and wood surfaces.
Application
Xtreme LP should be applied using a plural component, low pressure, 1:1 spray mixing equipment |
 |
 |
|
|
