DESCRIPTION
|
|
Coat A1:1 and Coat B1:1 is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system
for metal, concrete, fiberglass and wood surfaces.
|
FEATURES
|
|
Seamless
|
High Build
|
|
Tough and Elastomeric
|
Quick Drying
|
|
Chemical Resistance |
Low temperature Flexibility
|
|
Abrasion and Impact Resistant
|
Low Pressure Application
|
TYPICAL USES
|
|
Truck Bed Surfaces
|
Secondary Containment Lining with or without Geo Textile
|
|
Cargo liners
|
Cargo Holds
|
|
Utility Vehicles |
Horse Trailers
|
|
Industrial Floorings |
Encapsulation of Fiberglass and Polystyrene Foams |
|
Boat linings
|
Walkways
|
|
Waterproof Decking |
Mold Castings
|
COLOR
|
|
Neutral or Black. Custom colors are available upon request. |
PACKAGING
|
10 gallon kit; 5 gallons Side A and 5 gallons Side B
100 gallon kit: 50 gallons Side-A and 50gallons Side-B
|
MIXING
|
|
Coat A1:1 and Coat B1:1 may not be diluted under any circumstances. Thoroughly mix Coat B1:1 Side-B base material
with air driven power equipment until a homogeneous mixture and color is obtained. Coat B1:1 Side-B base material must be
thoroughly agitated until a homogenous mixture is obtained. Do not allow air to be incorporated into the product. Total
suspension must be achieved. Coat A1:1 Side-A Isocyanate requires no mixing.
|
COVERAGE
|
|
Coat A1:1 and Coat B1:1 may be applied at any rate to achieve desired thickness. Theoretical coverage per gallon is 1600
sq. ft. at 1 mil.
|
APPLICATION
|
Both Side-A and Side-B materials should be preconditioned at 75-80°F before application.
Coat A1:1 and Coat B1:1 should be applied using a plural
component, low pressure spray mixing equipment. The simple spray equipment can have a single motor
driving two separate fixed ratio proportioning pumps. The Side-A Iso and Side-B Resin are pumped
separately to a static mixing tube for air assisted or airless spray. It is recommended to use
a 3/8" x 24 element mixing wand / Static spiral mixer for proper mixing.
|
