DESCRIPTION
|
|
Coat A HP / Coat B HP is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for
metal, concrete, fiberglass and wood surfaces.
|
FEATURES
|
|
Seamless
|
High Build |
|
Tough and Elastomeric
|
Quick Drying
|
|
Chemical Resistance |
Low temperature Flexibility
|
|
Abrasion and Impact Resistant
|
TYPICAL USES
|
|
Truck Bed Surfaces
|
Containment Areas |
|
Cargo liners
|
Cargo Holds
|
|
Utility Vehicles |
Horse Trailers
|
|
Industrial Floorings |
Waterproof Decking |
|
Boat linings
|
Walkways
|
|
Encapsulation of Fiberglass and Polystyrene Foams |
COLOR
|
|
Neutral or Black. Custom colors are available upon request. |
PACKAGING
|
10 gallon kit: 5 gallons (47 lbs. net) Side-A and 5 gallons (43 lbs.
net) Side-B.
100 gallon kit: Side-A 50 gallons (473 lbs. net) and Side-B 50
gallons (neutral: 433 lbs. net, black: 435 lbs. net)
|
MIXING
|
Coat A HP / Coat B HP may not be diluted under any circumstances.
Thoroughly mix Coat B HP Side-B Base material
with air driven power equipment until a homogeneous mixture
and color is obtained.
Side-B base material must be thoroughly agitated until a
homogenous mixture is obtained. Do not allow air to be
incorporated into the product. Total suspension must be
achieved. Side-A Isocyanate requires no mixing.
|
COVERAGE
|
|
Coat A HP / Coat B HP may be applied at any rate to achieve desired thickness. Theoretical coverage per gallon is 1600
sq. ft. at 1 mil.
|
APPLICATION
|
Both Side-A and Side-B materials should be preconditioned at 75-80°F before application.
Coat A HP / Coat B HP should be applied using a plural component, heated, high pressure 1:1 spray mixing equipment
like Graco?s Hydra Cat, Gusmer or other equivalent machine may be used.
Both Side-A and Side-B materials should be sprayed at temperatures above 150°F. Adequate pressure and temperature
should be maintained at all times.
|
