I was spraying another companies product and discovered Xtreme’s X55 high pressure ............
>> more
Bobby K., Oklahoma City
A6 Series


Click to Enlarge





Fluid pumps are 200% to 400% larger than the competition. Pumps cycle 50% to 75% less than the competition. The large size of fluid pumps means that the same amount of material is pumped using less pump cycles, with less wear and tear on the seals, and resulting in less maintenance and machine downtime than the competition.

Advantages of a larger fluid section are:

 •  Fewer stroke changes results in less stress and wear on pump seals. This means longer seal life, less maintenance, and more machine uptime!

 •  Less pressure drop at trigger pull.
Fluid section displacement per cycle -
24 cycles = 1 gallon (.042 gallon / cycle)
6.25 cycles = 1 liter (.161 liter / cycle)
Output range < 0.5 to 2.0 gal / min (2 to 8 liters / min)

 •  Maximum fluid pressure - 2200 / 3000 psi

 •  Maximum hose length - 310'F heated hose

 •  6000 or 12000 watt high-efficiency heaters

 •  LED cycle counter for easy calculation of material usage

 •  Independent ISO, Poly & Hose heat controllers

 •  Overpressure / overtemperature safety circuits

 •  Retract switch for the air motor = a quick and easy device to always keep your pumps in the down position at the end of the day

 •  Compact, portable design - Only 29 (73 cm) wide - will easily fit through most doorways

 •  Abrasion resistant fluid section seals, piston and cylinder = low maintenance and long life

 •  Solid State Electronics = durable & reliable performance

 •  Consistent air pressure from the A6-series air motor and instantaneous reversing delivers uniform fluid / mixing pressure to the spray gun. There is no lead / lag or pressure drops that can adversely affect the mix of the A & B materials

 •  Configuration of the A6-series allows for fast & easy access to all components for inspection or service

 •  Cost of operation - the initial cost of the A6 is very attractive. Even more value is realized in its rugged design,low parts consumption, and economical long term operation
Modular High Efficiency Heaters
The high efficiency heaters are designed to deliver fast, accurate and continuous heat to the material at any flow rate. The fluid passage in the heater provides for extended dwell time thus achieving the highest T levels.

The A6 can be ordered with the standard 6000 watt primary heat package, or at a very economical price, the A6 can be ordered in a 12000 watt configuration. The Iso & Poly heaters have independent solid state LED controllers, so different temperature settings can be selected for the materials.
Piston Lubrication
P/N 23795-00 (Factory Installed Option) The new ISO piston lubrication system is an enclosed piston lubrication system that circulates pump lubricants in a sealed environment, providing longer seal life and further reducing scheduled maintenance requirements.
Probler P2


Click to Enlarge
Lightweight ergonomic design

 •  Dual piston triggering - 300 pounds activation power

 •  2 piece mixing chamber

 •  Grease fitting - fast daily maintenance

 •  Internal check valve - liquid will not enter air passages of the gun

 •  Quick / easy change of dispense nozzles
Turkey Xtreme Liners
© Xtreme Liners
Home | Bedliner | Oilfield | Residential | Marine | Mobile | High Pressure Equipments | Constructions
Other Vehicles | Available Chemicals | Great in Bed | Contact Us | Info Request | Warranty